Cable guide for the heat bed of the Snapmaker A350.

By guiding the cable upwards, no more problems with a sliding or blocking cable coming from the heatbed.

The total system consists of four different parts. One guide and three locks which can be clicked on the guide. If the cable saver does not stay in place, use some glue of double sided tape.

• Only tested on the snapmaker A350.
• Please print in fine settings with thick walls.
• After printing, remove supports to the guide and check connections of the locks with the guide.
• Don't forget to rotate the parts for optimal printing!

Snapmaker A350

No

Yes

0.16

40%

wall thickness 1.2 mm