This is a mostly accurate recreation of the plastic gen beyblade known as Draciel S, aka Draciel Shield, complete with two free-moving "metal" balls in the blade base. Because it uses Tightskin's base for an interchangeable spin gear, you'll want to print those parts at half your printer's usual speed.

This build comes with all of the parts that the original Draciel S came with, including the Cross Spike attack ring, the 8 Balance weight disk, and the Metal Ball Base. Included is a scan of the sticker sheet initially posted by Giga on World Beyblade Org, which you can print off of any regular paper printer.

Also credit to Mcup2 and UncleJoJo for the other base parts I used to make this bey.

Not much should be needed in the way of post-printing. If you do end up having troubles fitting parts together anyways, make sure you've remove every support that might get in the way with a pair of needle nose pliers. You can also try widening a slot that's too tight with a flat-head screwdriver by carefully wedging it in.

To apply the stickers, all you need is a pair of scissors and a glue stick (or whichever type of glue you prefer). I was able to get the sticker spots on the model accurate enough that when cutting, you can fairly reliably follow the thin white sticker outlines, as long as your printer made them visible.