Mostly inspired by
http://www.koh-i-noor.cz/shop/sablona-grafu-funkci-703061-kourova?rc=45
It s result of summing all paterns what I have needed in school, but they are pretty expensive and replacing them by paper ones was just for one use mostly so I decided to create this for schools with 3D printers to make for students (It should be printable even on low resolution printers - I am going to test it in my school as soon as possinble), or just for students, or workers who need this.

PLEASE UPLOAD MAKES, and suggestions for making it better and really useful for everyone.

IT HAS GOT: (so far)
ruler in centimeters with Pi
protractor
functions:

• y=x2
• y=2x2
  Graphs:
• tanx (Tgx)
• sinx
• sin(2x)
• sin(x/2), or sin(0,5x)

Fabbster

No

No

.3

100%

It is only 106x76x1,5mm wide (printable even for smaller printers)
Acording to SolidWorks s modul for weights it should weight about 11 grams.

I am going to print it firstly on worst printer that my school have to see if it really works even for printers what most of schools really have and what I have seen they have.