This is a case for Brett Tech's Info Orb. You can find the electronics Here:

https://brett.tech/products/info-orbs-full-dev-kit

The programing details can be found here

https://github.com/brettdottech/info-orbs?syclid=crc6teigtnhs73dehcb0

Bambu Lab

A1

No

12 %

I used a 0.4 nozzle.

I printed the items using the Bambu lab extra draft mode profile.

Used Fusion 360 for design. (Thank you Autodesk)

The screws used to hold the back on are M3x10 hex head.

The threads for the screws are plastic. I chose hex head screws so I could use a motorized screwdriver to initially help "cut" the threads.

Print the main body on its face. Print the lid on its back. Print the stand in its upright position.

The 3MF file is the Bambu lab project file.

10/02/24
Updated the main body to add display stability lips on each display.
Removed the fillets from around the face of the main body so you no longer have to print with "supports"
Replace the old stl and 3mf files with new ones to reflect these changes.

10/03/24
Added a main body with Printed text on the front.
Item with printed text is the iorb_logo.stl and iorb_logo.3mf. the 3mf file is a project file for the Bambu Lab A1 printer.