For the Mostly Printed CNC
http://www.thingiverse.com/thing:724999

Thanks to Allted for the Special Flex Foot. 5/16 hole

I wanted to make an adjustable setup for the MP CNC that bolts to the bed, here is what I came up with, I have it running on my set up now and works very nice,
each full turn is 1.44 mm in height.
Video's to follow.

https://youtu.be/vBZtJuDCN3E

5 inches of 5/16 threaded rod
4 inches of 3/4 conduit
1 5/16 X 9" turnbuckle from Lowes UPC code 038613124929
2 printed microinserts
1 printed microadjuster
1 printed Flex_Foot_MG
2 5/16 washers
1 5/16 split lock washers
2 5/16 nuts
This is for one complete adjuster.

Additional supplies:
1/2 drill bit
Locktite
Super Glue
Epoxy
Paste wax