Summary

This is a protection for a RunCam DVR-S module to be place under the frame of the TinyHawk 2 Freestyle. It might be suitable also for 20x20 split cams (but I didn't test it as I don't have one). the DVR need to be double sided tape under the frame in the center of it. This protection will allow SD access and stop/rec button operations. It has to be mounted with the lower 4 screws connecting the pole to the upper plate. no need to use longer screws... original screws are long enough.

For easy usage, if you have the DVR-S version, solder the H/L pin on the DVR board to the LED pad on the FC of the TH2F.
Then in the CLI paste in:

resource LED-STRIP 1 none
resource PINIO 1 A00
set pinio_config = 129,1,1,1
set pinio_box = 0,255,255,255
save

this will start the recording when you arm the quad and stop the recording when disarm.
This DVR doesn't save the file if you unplug the battery before stopping the recording, so this is the easiest way to never miss a file.