Angepasste Version vonhttp://www.thingiverse.com/thing:27468

Erstellt mit Customizer!http://www.thingiverse.com/apps/customizer/run?thing_id=27468

Mit den folgenden Optionen:

Gear_pos_small_r2 = [0,-(Small_Gear_rad+Gear_Play/2)][3,0]
Gear_pos_small_r1 = [0,-(Small_Gear_rad+Gear_Play/2),0]
show_target = 1
Rot = 0
Handlänge = 30
arm_length = 45
Schraubengröße = 3
GripPlate_Höhe = 15
Gear_Stages = 1
Gear_pos_large_l = [0, Arm_Gear_Pos, 0]
Gear_pos_large_r = [0,-Arm_Gear_Pos,0]
Gear_Play = 0,2
Assembly = 0
Gear_Teeth = 10
Gear_pos_small_l2 = [0,(Small_Gear_rad+Gear_Play/2)[3,0]
Gear_pos_small_l1 = [0,(Small_Gear_rad+Gear_Play/2),Gear_thickness]
Screw_play = 0.1
freeArmStay_Offset = 32
GripPlate_pos_r = [(Arm_Länge <en> GripPlate_pos_r = [(Arm_Länge <de> GripPlate_pos_r = [(Arm_Länge <en> GripPlate_pos_r = [(Arm_Length <de> GripPlate_pos_r = [(Arm_Länge <en> GripPlate_pos_r = [(Arm_Length <de> GripPlate_pos_r = [sin(Rot/2))+(freeArmStay_Offsetcos(Greifwinkel))+(Handlänge),-Greif-Offset+(Arm-Länge(1-cos(Rot/2)))+(freeArmStay_Offset(sin(grip_angle))),0]
GripPlate_pos_l = [(Arm_Länge <de> GripPlate_pos_l = [(Arm_Länge <de> GripPlate_pos_l = [(Arm_Länge <de> GripPlate_pos_l = [(Arm_Länge <de> GripPlate_pos_l = [(Arm_Länge <de> GripPlate_pos_l = [(Arm_Länge <de> GripPlate_pos_l = [sin(Rot/2))+(freeArmStay_Offsetcos(Greifwinkel))+(Handlänge), Greifabstand-(ArmLänge(1-cos(Rot/2)))+(freeArmStay_Offset(-sin(grip_angle)),0]
Grip_pos_r = [(Arm_Länge <en> Grip_pos_r = [(Arm_Länge <de> Grip_pos_r = [(Arm_Länge <en> Grip_pos_r = [(Arm_Länge <de> Grip_pos_r = [(Arm_Länge <en> Grip_pos_r = [(Arm_Länge <de> Grip_pos_r = [(Arm_Länge <en> Grip_pos_r = [sin(Rot/2)),-grip_offset+(arm_length(1-cos(Rot/2)),-Arm-Dicke-0.3]
Grip_pos_l = [(Arm_Länge <en> Grip_pos_l = [(Arm_Länge <de> Grip_pos_l = [(Arm_Länge <en> Grip_pos_l = [(Arm_Länge <de> Grip_pos_l = [(Arm_Länge <en> Grip_pos_l = [(Arm_Länge <de> Grip_pos_l = [(Arm_Länge <en> Grip_pos_l = [sin(Rot/2)), Grip_Offset - (Arm_Länge)(1-cos(Rot/2)),-Arm-Dicke-0.3]
freeArmStay_pos_l = [(freeArmStay_Offset <de> freeArmStay_pos_l = [(freeArmStay_Offset <de> freeArmStay_pos_l = [(freeArmStay_Offset <de> freeArmStay_pos_l = [(freeArmStay_Offset <de> freeArmStay_pos_l = [(freeArmStay_Offset <de> freeArmStay_pos_l = [cos(30)),grip_offset-((freeArmStay_Offsetsin(30)))-Arm_Länge,0]
freeArmStay_pos_r = [(freeArmStay_Offset <de> freeArmStay_pos_r = [(freeArmStay_Offset <de> freeArmStay_pos_r = [(freeArmStay_Offset <de> freeArmStay_pos_r = [(freeArmStay_Offset <de> freeArmStay_pos_r = [(freeArmStay_Offset <de> freeArmStay_pos_r = [cos(30)),-grip_offset+((freeArmStay_Offsetsin(30)))+Arm_Länge,0]
target_translation = 110
Plattendicke = 3
Armstärke = 5
hide_coverplate = 1
Gear_Pitch = 400
arm_width = 8
target_side = 50