Dragon taking off from high cliff
Pebble Strut
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-06-26 19:41:03
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 193.18x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm
Filaments Used: (* = Owned)
#000000 PLA Smart Recycled Black Transmission Distance: 0.5
#55007f PLA smartfil morado Transmission Distance: 1.6
#ff0000 PLA Smart Recycled Red Transmission Distance: 4.4
#e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3
#39acdf PLA Smart Recycled Blue Transmission Distance: 2.2
#ffffff PLA Smart Recycled White Transmission Distance: 5.7
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to morado
At layer #10 (0.88mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to Blue
At layer #16 (1.36mm) swap to White for the rest.
The Model is 193.18x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm
Filaments Used: (* = Owned)
#000000 PLA Smart Recycled Black Transmission Distance: 0.5
#55007f PLA smartfil morado Transmission Distance: 1.6
#ff0000 PLA Smart Recycled Red Transmission Distance: 4.4
#e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3
#39acdf PLA Smart Recycled Blue Transmission Distance: 2.2
#ffffff PLA Smart Recycled White Transmission Distance: 5.7
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to morado
At layer #10 (0.88mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to Blue
At layer #16 (1.36mm) swap to White for the rest.
Tags
Modellquelle
Original-Link: Details anzeigen
CC BY