This is a great Print! The pictures don't do it justice. It can be printed on an AMS by switching out the black to white after it is done printing layer 8 layer. The white then needs to be assigned or directed to print from the black slot.

Project: Tiger v2.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 200x155.04mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Bambu Basic Black Transmission Distance: 1.4
PLA BambuLab Basic yellow Transmission Distance: 8
PLA BambuLab Metal Copper Brown Metallic Transmission Distance: 1.4
PLA Coli3o Orange Transmission Distance: 7.3
PLA Bambu Lab matte ivory white Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.52mm) swap to yellow mod
At layer #9 (0.56mm) swap to Copper Brown Metallic
At layer #16 (0.84mm) swap to Orange
At layer #22 (1.08mm) swap to yellow mod
At layer #26 (1.24mm) swap to ivory white for the rest.