These simple rods are the connecting pieces for the Dragon scimitar model by @johnny . He used wooden dremels, but I preferred printing them, so here we are.

I decided not to go with the maximum range to add stability and make it easier to build them together. I made the following overview picture for better understanding. For reference, you can also see the measurements I took after printing the Dragon scimitar model by @johnny with the Bambu Lab X1 Carbon.

Rods

1. Rod 1 H1/H2: 112 mm L, 14.1 mm W
2. Rod 2 H2/B1/B2: 195.57 mm L, 14.1 mm W
3. Rod 3 B2/B3/B4: 223.175 mm L, 14.1 mm W
4. Rod 4 B4/B5/B6: 213.1 mm L, 14.1 mm W
5. Rod 5 B6/B7/B8: 133.2 mm L, 14.1 mm W || 33.2mm L 12.75mmW

Measurements

• H1: 61.2 mm
• H2: 50mm || 50 mm
• B1: 98.2 mm
• B2: 94.75 mm (half: 47.375 mm)
• B3: 127.3 mm (half: 63.65 mm)
• B4.1: 48.5 mm
• B4.2: 79.2 mm
• B5: 89.4 mm
• B6: 89 mm (half: 44.5 mm)
• B7: 88.7 mm
• B8: 33.2 mm