Sign featuring the BYU Cougar logo. This was the ‘official’ logo of BYU throughout most of the 80's and 90's, and is my favorite.

The sign is 240x140 mm, and 5 mm thick (3 mm backing, 2 mm raised lettering).

It's printed using AMS with blue and white filament. Since the lettering is raised, this could easily be printed without AMS and a single manual color swap right when the lettering starts.

I have provided 2 plates. One is just the sign, and the other is the sign but with cutouts for 8x2 mm magnets for if you want to stick it to something. With a little luck, the magnets can be friction fit, but use a little glue if they seem loose. The holes can also easily be adjusted for size from within Bambu Studio.

Here's an Amazon link to some magnets that will work: https://www.amazon.com/dp/B0CDH1297R