llavero del jugador del real madrid bellingham

Project: bellingham.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70x87.54mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.1mm and the Actual Depth is 2.8mm

Filaments Used:
PLA smartfil Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA smartfil carne Transmission Distance: 1.6
PLA smatfil amarillo Transmission Distance: 5.8
PLA smartfil gris Transmission Distance: 0.8
PLA smartfil White Transmission Distance: 6
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to carne
At layer #19 (1.6mm) swap to amarillo
At layer #23 (1.92mm) swap to gris
At layer #26 (2.16mm) swap to White for the rest.