Guerrero de la pelicula 300 realizado en hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Silver
At layer #8 (0.72mm) swap to Jade White
At layer #12 (1.04mm) swap to Black
At layer #21 (1.76mm) swap to Red for the rest.