Art Credits: Monika - 0227

Support the artist so they can keep making cool art :)

Warning: Must be printer with a 0.4mm nozzle.

Size: 200mm x 200mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA Sunlu Blue Transmission Distance: 3.5
PLA Sunlu Grass Green Transmission Distance: 2.5
PLA Sunlu White Transmission Distance: 6

Settings 1 (Slow)

Print at 100% infill with a layer height of 0.04mm with a base/first layer of 0.28mm

Swap Instructions:
Start with Black
At layer #17 (0.92mm) swap to Blue
At layer #32 (1.52mm) swap to Grass Green
At layer #35 (1.64mm) swap to White for the rest.

Settings 2 (Less Slow)

Print at 100% infill with a layer height of 0.04mm with the first 3 layers at of 0.28mm.

• In prusa slicer, use a height range modifier to change the layer height to 0.28mm from 0-0.84mm of height (to save time)

Swap Instructions:
Start with Black
At layer #5 (0.92mm) swap to Blue
At layer #20 (1.52mm) swap to Grass Green
At layer #23 (1.64mm) swap to White for the rest.

Tips:

50 bottom layers, 1 top layer, 1 perimeter. (normal hueforge stuff)

 Set top layer to hilbert curve (takes more time, but looks cooler imo)