Panda pencil holder
Jessica Martinez
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-06-16 13:07:35
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Layers (Layer Height): 0.2 mm for a balance between details and printing speed. Print Temperature: 200-220 °C, optimized for PLA material. Bed Temperature: 50 °C for better adhesion of the model to the bed. Print Speed: 50 mm/s for stable and quality printing. Infill: 15-20% for sufficient model strength. Supports: Use supports only where absolutely necessary, such as under recesses or protrusions. Cooling: Enable cooling to minimize deformations during the printing of smaller details. Ensure that these values are adjusted to your 3D printer specifications and make adjustments as needed.
Tags
Modellquelle
Original-Link: Details anzeigen
CC BY