Project: Casa terrorifica.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x114.29mm in size

 You may print at higher layer heights below the Min Depth of 0.4mm

 The Max Depth is 2.8mm and the Actual Depth is 2mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PETG JAYO Gray Transmission Distance: 2.5

PETG GEETECH Gray Transmission Distance: 3

PETG JAYO White Transmission Distance: 6

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Gray

At layer #12 (1.04mm) swap to Gray

At layer #18 (1.52mm) swap to White for the rest.