FIFA Fair Play Trophy
Designed with AI

The tip of the "upper" arm apparently can not be sliced (i guess it is because it's extremely thin)

I recommend a minimum of 25 cm height but if you want it smaller you must use a 0.2-0.3mm nozzle.
I highly recommend adaptive layer and adaptive infill. While the base can be made with a 0.3 layer height, the joint between the leg and the base must be max 0.2 with 100% infill

To use less filament, you can adapt the infill from the "upper belly" till the "shoulders" to 20-30% but ONLY on the main body. the leg and arms must be 100% due to very thin parts.