This remix adds a fitting for the filament input path that can be used either for a dry-box or as a guide to keep the brass bushing on the sensor from shredding the filament as it feeds. This version also changes the sensor mounting holes to use Initeq M3-0.5 short heat set inserts instead of threading the screws directly into the plastic part. It adds another set of counter-bored mounting holes. And it enlarges the threads and filament path by 4% to both work better when printing this with ABS filament (as the original size tended to crack due to the insertion force of tightening the fittings) and to provide a smoother path for the filament.