*Features:

• 2 notches to easily remove battery out of adapter.
• Customizable diode type to improve correction level.
• DO-35 size is supported.

*Print setting: Extra fine (0.06 mm), Support = Yes, Support Density = 10%, Brim = Yes.

*To-do:

• Optimizing model so printing is easier.
• Trying different pring settings.

A battery adapter to fit SR44 battery to camera using PX625 battery (mercury).
This adapter is totally fit in dimension with a PX625 battery. The voltage is dropped by a Schottky diode placed inside the adapter.
Put one end of the wire in the diode through the slot on the adapter. Twisting this end of the wire so it fits in the cavity of adapter, it will connect with negative end of SR44 battery. Because we forward-biased this diode so this end of the diode should have the mark.
The other end of diode, twist and hanging it over the top of the battery.
Additionally you could use a conductive adhesive metal sheet on the top the adapter to fixate the wire and improve quality and the look.
Check the polarity of diode to ensure you connect it correct. For visual demonstration, check "Make" part.