When printed with a layer thickness of 5 microns and exposure time of 0.5 seconds, this drawing can be used to calculate the working curve of an SLA resin.

With these settings, each square should receive a set exposure during printing.

This model is intended for use with the Autodesk Ember printer and should be printed without the build platform attached.

Each square has an area of 1cm^2.

This model is a simplified version of Autodesk's working curve print standard found in the Instructable below.
http://www.instructables.com/id/How-to-Take-a-Working-Curve-Measurement-and-Create/