Modeled up and printed 2 of these for holding collets in my hone/grind area at work. Not a large area and table space is limited, so moving the collets into these helped clear up some space. Included the Autodesk Fusion file for anyone who has the ability and need to modify it, the pegs are spaced for 1 inch pegboard grid. It is a very large print, 381mm on the width. The 3MF file is setup for an Anycubic Kobra 3 max, 3 wall loops and 10% infill uses 360 grams of PETG and takes 13+ hours of runtime.