Printed with CR-10 using Cura 4.1

-Filament - Tianse Black PLA

-Dimensions:
(X) - 115mm
(Y) - 115mm
(Z) - 6.5mm

-0.2mm Layer height
-Top/Bottom - 4 each
-Infill - 10% Grid
-Infill Before Walls - Disabled
-Extruder - 210c
-Bed - 60c
-Retraction - Enabled 4.5mm
-Print Speed - 60mm/s
-Infill Speed - 60mm/s
-Travel Speed - 80mm/s
-Acceleration Control - Enabled
-Build Plate Adhesion - Brim 5 line

-Print Time - 2h 57min
-29g / 9.84m