Bucket grid guard
Herman Robert
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-08-08 18:37:46
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
This is a 244mm diameter grid guard to avoid picking up grit on your sponge whilst washing your car.
This was printed in PLA which apparently floats, so I've included two 8.2mm holes to allow an 8mm bolt and nuts to give it some weight.
It was designed in Onshape CAD software.
This was printed in PLA with bed supports for the middle piece with 30% infill.
Modellquelle
Original-Link: Details anzeigen
CC BY