A hueforge print of some nice Christmas snowmen. Instructions below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Basic Red Transmission Distance: 4

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Blue Gray

At layer #7 (0.64mm) swap to Jade White

At layer #13 (1.12mm) swap to Black

At layer #15 (1.28mm) swap to Red

At layer #20 (1.68mm) swap to Jade White for the rest.