The Dude Abides, hope you do too.

Get the free color .3MF file version here: https://makerworld.com/en/models/600478

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 178x154.31mm in size

You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black
At layer #7 (0.72mm) swap to Red
At layer #12 (1.12mm) swap to Orange
At layer #19 (1.68mm) swap to White for the rest.

Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag