This is a K-cup dispenser with a modular design, print as many as you need. There is a recess on the backside of the model. The intent for this is to accept a 1"(25mm) strip of double sided tape. Special request from my wife. I used ABS black for this print, also I printed these standing up with the dispense opening at the bottom. ENJOY!

Tape for mounting:
https://www.walmart.com/ip/Scotch-Permanet-Mounting-Tape-1-in-x-125-in-White-1-Roll-Pack/27472539?wmlspartner=wlpa&adid=22222222227018728897&wl0=&wl1=g&wl2=c&wl3=40873043672&wl4=pla-78765853112&wl5=9030457&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=27472539&wl13=&veh=sem