MPCNC PCB clamp
Polly Andrew
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-01-26 12:05:44
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Basic clamp for MPCNC to hold PCBs down for milling. Clamp uses two M6 screws or bolts with a 100mm grid, slot holes are 50mm to hold any PCB size. PCBs need to be at least 1mm thick to be held in place (standard PCBs are ~1.6mm).
Modellquelle
Original-Link: Details anzeigen
CC BY