UHS Hotend is a special parts for the most common used Extruder as E3D V6. It doesn't have throat or nozzle because them are an UNIBODY component. This Hotend was designed and developed to solve different common issues as clogging and blobbing and the usage of un-threaded parts between heatedblock and nozzle/throat increased durability and lowered galvanic corrosion. Now throat and nozzle are a unique part called TIP and the heated block could be easily mountend on it and locked by some grains.

This hotend was tested with all materials from 140 to 450 degrees as WAX and PEEK. The main aim of it is to solve problems related by the long usage of high temperature polymers. It offers durability and reliability and thanks to the conical inner hole polymers were deformed gradually from 2 mm to 0.4 mm without stressing it.

Each kit is composed by 1 Tip (0.4 mm) and Brass Heated Block. Worldwide tracked shipping is included and it will takes about 15-30 working days.

WHERE TO BUY IT:
https://www.ebay.it/itm/152992172618?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649