For 1999 EZGO TXT likely fits other years.

The part EZGO should have made but didn't.

If your brass bushings have worn and you have a clunking sound from movement up and down the shaft of the idler arm put this bushing between the two thrust washers (#31 & #32) with the hollow side down (toward #31) and tighten down. (If your wear is from the shaft shifting side to side this will likely not help and you need to replace the flanged bearing #5)

Print in TPU and grease as appropriate.

Use common sense and at your own risk, if your steering falls off and you die it is not my fault!