First off let me say that any donations for this design are greatly appreciated, thank you very much in advance!

This model is a design I made to made to cut cookies for the fiance as she loves owls and she loves baking so I thought what better combination! this cookie cutter works a treat as we tried it on shortbread unfortunately I forgot to take pictures!

This is the Standard cookie cutter I also made this in a much larger size for Giant owl cookies! the link is http://www.thingiverse.com/thing:1917649

Happy printing and even happier baking! I hope this works as well for you as it did for us!

The print settings that I used are as follows.

Layer height - 0.25 mm
First layer height -0.32
Infill % - 15%
Infill pattern - Honeycomb
Support material overhang threshold - Support material disabled.
Support material pattern - Support material disabled.
Extruder Temperature - 195 degrees (I have used PLA so modify these settings if using ABS or another material.)
Bed temperature - 35 degrees (I have used PLA so modify these settings if using ABS or another material.)

I hope you enjoy this design!