Template for use with a static grass applicator.
How to use:

1. Print (0.2 resolution is fine, infill 15%)
2. Get silicone paper or similar material you want the grass tufts on.

3. Dip the template into a bowl of glue, preferably a little bit watered down "wood glue". You might need to experiment with type of glue and glue-to-water ratio.
   

4. Gently apply the now glued tip of your print onto the baking paper, making a lot of glue circles at the same time.
   
5. Bring your static grass applicator and apply grass.
   
6. Leave for dry an then remove excess grass.
7. Have fun

Also: For info on using the grass applicator and how to connect it see:
https://www.warpainter.net/ekmps/shops/91e0de/resources/Other/making-grass-tufts.pdf?fbclid=IwAR38sCwZwYeisYDZvPBJoEWwZ6FK5kpTXwa7c0TguhGx0B5TxLQCkoLQzWA