Hi everyone,

Please note this prints at 0.16 layer, 0.24 initial. This is thick based but you can reduce filament use if you cut and reduce the infill of the base object without changing the layer amount. If you do cut the base and change the layer amount somehow, you will need to manually fix the colour changes. I prefer using 100% infill in this type of thing so I published it as printed.

Ironing is on by default @ 40mms + prime tower.

Feedback welcome as I have never shared anything before.

Project: rusteze.hfp
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mm

The Model is 250x208.67mm in size
You may print at higher layer heights below the Min Depth of 2.2mm
The Max Depth is 5.2mm and the Actual Depth is 5.4mm

Filaments Used:
PLA+ eSun Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA+ eSun Yellow Transmission Distance: 7.8
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #14 swap to Scarlet Red
At layer #21 swap to Yellow for the rest.

Hope you enjoy using the printed models however you like - it printed first go no worries for me.

Hueforge pro: 55506