If you like it, leave me a boost like and a comment with the photo of the print. It would help me a lot to know if you like it...
It can be printed with any 3D printer.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.09x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA smartfil Basic Black Transmission Distance: 0.6
PLA smartfil dark grey Transmission Distance: 0.8
PLA smatfill amarillo Transmission Distance: 5.8
PLA smartfil Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to dark grey
At layer #13 (1.12mm) swap to amarillo
At layer #20 (1.68mm) swap to Jade White for the rest.