Project: 雄狮.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

材料TD值：
    PLA 黑色 Transmission Distance: 0.4
    PLA Red Transmission Distance: 5.6
    PLA  Gold Transmission Distance: 6
    PLA  白色 Transmission Distance: 5.6
材料更换切片层数：
    Start with 黑色
    At layer #8 (0.72mm) swap to Red
    At layer #12 (1.04mm) swap to Gold
    At layer #21 (1.76mm) swap to 白色 for the rest.