Hueforge image … prints will vary in quality and appearance depending on filament and colours chosen, this image is tuned specifically for the filaments and colors listed below. Original build size is 200 x 200, if you adjust the size do not vary Z thickness.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Pure Yellow Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #6 (0.56mm) swap to Grey
At layer #11 (0.96mm) swap to Pure Yellow for the rest.