UPDATE Due to already crashing my printer into the camera at full speed breaking the lens off my camera, I have modified this to reduce crashes as much as possible. Please see the revised version in the remixes!

Just a simple Camera mount to fix the below camera to the build plate of my CR10 and keep the cable out of harms way. I am using this camera with OctoPrint on my Raspberry Pi 5.
https://www.aliexpress.com/item/1005005249688226.html?spm=a2g0o.order_list.order_list_main.11.3f28180231GSYR

It is just clamped to the build plate (7mm thick) using some 25mm Binder/Bulldog Clips. Secure enough to hold the camera steady, but hopefully not too tight so that it can come off if I accidentally crash the print head into it!

If I were to redo this, I would maybe move it another 10mm further away to give a bit more clearance just to make sure I'm using as much of the build plate as possible.

I have Printed it in PLA which I'm hoping will last reasonably as the clamping action is done by the metal binder clips.
I printed with the text down, with supports for a bit of peace of mind but could be printed without as the only 'steep' overhang is a bridge.