Improved version of my simple camera mount to fix the below camera to the build plate of my CR10 and keep the cable out of harms way. I am using this camera with OctoPrint on my Raspberry Pi 5. I would highly recommend OctoPi to anyone thinking about it.
https://www.aliexpress.com/item/1005005249688226.html?spm=a2g0o.order_list.order_list_main.11.3f28180231GSYR

It is just clamped to the build plate (7mm thick) using some 25mm Binder/Bulldog Clips. I have updated the design so my CR10 will no longer be able to crash into the camera or the mount. I have butchered the binder clips with an angle grinder to ensure the nozzle and cooling shroud cannot hit this either meaning I have not lost any usable space on my bed. Doing this makes it very difficult to get it onto the bed, but since I don't remove the bed frequently, this isn't an issue for me.

I have Printed it in PLA which I'm hoping will last reasonably as the clamping action is done by the metal binder clips.
I printed with the text down, without supports as the only 'steep' overhang is a bridge which is then covered up by the clips.