🔧 Printing Recommendations

- Orientation: Print the keychain sideways (90° rotation) to reduce layer lines on the text and improve surface quality.  

- Supports: Use tree-type supports only under the hole and decorative edges.  

- Layer Height: Set between 0.16–0.20 mm for smooth lettering and balanced speed.  

- Infill: 20–30% is enough for durability without excess material.  

- Material: PLA or PETG recommended for strong and glossy finish.  

- Bed Adhesion: Use a brim if printing on a smooth bed to prevent warping.  

- Cooling: Enable fan cooling after the first two layers for crisp details.