Project: Street Scene 2.jpg

Print at 100% infill with a layer height of 0.08mm 0.08 With a base layer of 0.16mm

0.16
The model is 150.67x200mm in size
150.67 200
You can print at higher layer heights below the base thickness of 0.48mm 0.48
The maximum thickness is 2.24mm and the actual thickness is 2.24mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Bambu Lab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.