LED strip holder clip for CTC/Flashforge/Replicator/Makerbot clone printers

I have bought some cheap 5050 SMD LED-strips from ebay http://www.ebay.de/itm/221926233341 (1,99€ for 4 pieces included shipping) and wanted to mount them on my CTC Printer. The tape on the stripes doesn't stick well on the wood frame of the printer. Normal double sided tape would have done the trick. But i decided to mount the stripes under a 40° angle to light the actual printbed.

The original idea is from http://www.thingiverse.com/thing:1194640. Thanks a lot.

But i didn't want to wast so many filament for only a LED strip holder. And the 150mm or 300mm length are not so good to print on the CTC.

The 5050 SMD LED strip from ebay is around 100mm long and waterproof sealed. This
makes it very stiff and perfect for a two point mounting.

You can clip this on any side of the printer (see pictures)

You will need:
2x of the mounting clips for one LED strip (http://www.ebay.de/itm/221926233341).
I've put some double sided tape under the top of the printer to fix the position. It's not needed because the clips fit well, but i waned to be extra safe.