FR

This accessoire à été conçu par laber76 du forum lesimprimantes3D.fr, mais il est trop timide pour publier ici un truc que je trouve super. Je vous fait partager sa création, avec son accord.

Support à fixer sur l'extrudeur E2 des têtes Titan (adaptables sur une Tenlog TL-D3 Pro) permettant un réglage précis de celle-ci. D'origine, elle est maintenue par 2 vis latérales et peut coulisser librement. This accessory allows you to precisely adjust the height.

The fixation is done by means of M3 visors, provide an M3 visor of 45 mm and 2 M3 sockets for the visor to allow the precise adjustment.

Position this support against the central part of the motor so that the flat of the visor is well aligned with the vertical of the horizontal metal part of the motor support.

https://youtu.be/orXDH_eBFXE

ENG

This accessory was designed by laber76 from the forum lesimprimantes3D.fr, but he's too shy to post something here that I think is great. I share with you his creation, with his agreement.

Support to be fixed on the E2 extruder of the Titan heads (adaptable to a Tenlog TL-D3 Pro) allowing a precise adjustment. Originally, it is held by 2 side screws and can slide freely. This accessory will allow you to adjust it precisely in height.

Fixing is done with M3 screws, provide a 45 mm M3 screw and 2 M3 nuts for the screw allowing the adjustment.

Position this support against the central part of the motor so that the flat of the screw is vertical to the metallic horizontal part of the motor support.