Project: Ironman in explosion.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

I made it the small enough to fit on an A1 mini. You can increase size.
If changing size . . . only change X and Y, not Z.

The Model is 175x98.44mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA Creality Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Sunlu Yellow Transmission Distance: 6
PLA Creality White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Red
At layer #21 (1.76mm) swap to Yellow
At layer #30 (2.48mm) swap to White for the rest.