Before anybody says anything in the comments, I will NOT apologize for art.

So I was playing with my Dummy 13 when I had a horrible thought… Dummy Thicc 13

Thus, I made a butt for the Dummy 13. The only reason this took me longer than an hour is because it was my first time using TinkerCAD, I literally just made a butt shape and stuck it onto the stand attachment.

Some caveats:

• As previously implied, this is my first time making any sort of model for 3D printing. I almost certainly did something wrong. If you have any suggestions for improvement, I'm open to them!

• I don't think I can get the butt attachment off without some sort of tool.

• The creator of Dummy 13 said ASA was the best material for the structure. Since I don't have any ASA, I printed and sliced mine in PETG-HF. I did this because the stand attachment was included as one of the structure pieces, so you should probably not print this piece in PLA.

• I have put this under the same CC attribution license as Dummy 13. Nobody else needs to take the blame for this. You can totally sell it if you want, though.

• I know the red PETG in the pictures makes my Dummy 13 look like a baboon. I only had red and translucent blue PETG on hand, and nobody likes translucent butts (unless you're into ghosts, I guess).

• The butt goes into the stand hole. This means you can't attach the stand to the model. I suppose there may be ways around that, but they're too terrible to think about.

• This model was originally tested/printed on a Bambu Labs P1S. The 3MS file included was sliced in Bambu Studio using Bambu Labs PETG-HF. I have no idea how other printers/slicers/filaments will deal with this, and you may have better luck just using the STL.

• This is butt only. If you want the rest of it, you'll have to go to the Dummy 13 page.

• Dummy 13 was created by Lucky 13 Toys.

Happy printing!

NB: This model was originally posted to Maker World, then cross posted to Thingiverse, Cults 3D, and Printables.