Print using 100% infill, with a layer height of 0.08 mm and a base layer height of 0.16 mm.

Materials Used:

PLA+ Sunlu Black Transmission Distance: 5.7

PLA+ IIID Max Purple Transmission Distance: 0.2

PLA+ IIID Max Light Blue Transmission Distance: 8.3

PETG JAYO White Transmission Distance: 6

!!!! It appears you are using a mix of various consumables. Please ensure this is what you intend. !!!!!

Replace command:

Start with black

Switch to purple at layer 6 (0.56mm)

Switch to light blue at layer 8 (0.72mm)

The remaining part after layer 15 (1.28mm) changes to white.