This is an improved (version 2) remix of Circular - Criss Cross Dice Tower.

Improved due to requests. Improved version has:
1,Bigger Tray
2,Thicker bottom
3,Longer slope at the bottom { That is: No more hidden dice! }

Reminder - - use similar setting for the original Circular criss cross dice tower.
it still has lots of shallow overhangs! like there original version.

The tower is Designed to roll dices in clockwise spiral down the tower, and give it a good roll in all directions

3 directional baffles to bounce dice off the side walls,
Final roll in the catch tray.
Suits Any Dice up to Do= 26 mm ( 1 inch ) outer diameter dice size, even your D30’s
Printing:-

Designed to be printed upright,
_No supports needed
_No infill needed - the form is already very rigid.
_NOTE! Make sure you’ve dialled in your printing profile. There is A LOT of difficult overhangs on this print.

For Printing:
- Print with 0.16mm layer height Or LESS,
- Print at SLOW speed about 10mm/s to 15mm/s
- Needs 4 or 5 top & bottom layers thickness for corner strength.

Importantly, enjoy & have fun with your games yo!