Looks much better live that's why I added few picture. Also I didn't have good dark blue i Beige filamnet. So Transmission was not good.

Last one is from hueforge

Project: jennefer.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 192x120mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA+ Esun Dark Blue Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Sunlu Meta White Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Blue
At layer #9 (0.8mm) swap to Beige
At layer #17 (1.44mm) swap to White for the rest.