Project: Harley Quinn.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm

Filaments Used:
    PLA Overture Matte Blue Transmission Distance: 0.5
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
    PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Blue
    At layer #6 (0.56mm) swap to Black
    At layer #8 (0.72mm) swap to Scarlet Red
    At layer #10 (0.88mm) swap to Lemon Yellow
    At layer #13 (1.12mm) swap to White for the rest.