I’m looking for a simple clip that still looks good. There are some designs on MakerWorld, but they have some issues I don’t like. The main problem is that the clip isn’t very tight. So I decided to create a design with two magnets to help keep the two ends together. To print this design, you need to pause printing at layer 121 and insert a magnet inside.The stronger the magnet, the tighter the connection.

Magnet used (http://tinyurl.com/mwvt848c) – I recommend using a very strong magnet

Size:

Clamp: circumference - 38mm, height - 18mm

Maximum size magnet that can fit in the slot: circumference 10.5mm, thickness – 3mm

Magnet used: 10mm in circumference, 3mm in thickness