A little penguin printed by HueForge that I found on Google. Its real gray color looks very fluffy, so it turns out to be really beautiful when printed.

Print with 100% infill, a layer height of 0.08 mm, and a first layer height of 0.16 mm

Materials Used:

PLA+ Sunlu Black Distance: 0.6

PLA+ Sunlu Gray Distance: 2

Standard white PLA Distance: 7

PLA+ Sunlu White Distance: 5

Swap command:

Start with black

Switch to gray at layer 9 (0.8mm)

Switch to white at layer 13 (1.12mm)

After layer 19 (1.6mm), the remaining parts all turn white.