My goal about this design was that the Magna Swatch becomes part of the filament storage system.

The stand lets you display your Magna Swatch right on the front of your filament boxes/rack, so the colored labels are immediately visible. At a glance, you can see which colors you have and where they are stored without having to open boxes or search through your filament collection.

It makes the whole setup feel more organized while also turning the storage rack into a useful color reference. The swatches are easy to see, easy to access, and right where you need them when choosing your next filament.

A small stand, but a big improvement in how practical and visually organized the filament storage becomes.

• Requires two 8x1mm magnets and a drop of superglue

Superglue a 8x1mm magnet in each hole, check that the polarity is aligned with the Magna swatches!
Use the Glue up jigs to make it easy to glue the magnets in

• Ensure the polarity of the magnets is correct
• Easily slide the magnets into place

MagnaSwatch Swatches for Bambu Filaments:
https://makerworld.com/en/models/2342040-magnaswatch-swatches-for-bambu-filaments

I'm also designing a stand for the AMS so you can display the filament in front of your AMS.